CCNP Enterprise ENCOR (350-401)

CCNP ENCOR training Institute in Ahmedabad, Gujarat If you are interested taking CCNP ENCOR then get in touch using the contact us info@ionxworld.com or use the phone numbers to contact us.

Call +91-7046794711 Chat +91-7046794711
main-img

To earn CCNP ENCOR, you pass two exams, a core exam and an ENCOR concentration exam of your choice. And every exam in the CCNP ENCOR program earns an individual Specialist certification, so you get recognized for your accomplishments along the way.

CCNP ENCOR

"The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.1 course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions."

This course helps you prepare to take the 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam, which is part of four new certifications:

  • CCNP Enterprise
  • CCIE Enterprise Infrastructure
  • CCIE Enterprise Wireless
  • Cisco Certified Specialist – Enterprise Core

This course will help you:

  • Configure, troubleshoot, and manage enterprise wired and wireless networks
  • Implement security principles within an enterprise network

Enroll for CCNP Traning Free Demo Classs
Request Demo Class

₹35000/- | $650/- Duration: 90 Days

[Note: Prices displayed are after Discount and includes GST]

CCNP ENCOR (350-401) Brochure

Syllabus of CCNP ENCOR Course in Ahmedabad

  • 1.1 VLANs and Trunks
  • Introduction to VLANs
  • How to configure VLANs
  • 802.1Q Encapsulation
  • How to configure Trunk
  • Dynamic Trunking Protocol (DTP)
  • Introduction to VLAN Trunking Protocol (VTP)
  • VTP Version 3
  • How to Troubleshoot VLANs and Trunks
  • 802.1Q Q-in-Q
  • 1.2 STP
  • Introduction to Spanning-Tree
  • Spanning-Tree Cost Calculation
  • Spanning-Tree Port States
  • Spanning-Tree Topology Change Notification (TCN)
  • Spanning-Tree Reconvergence
  • Troubleshooting Spanning-Tree
  • 1.3 RSTP
  • Rapid Spanning-Tree (RSTP)
  • Rapid Spanning-Tree (RSTP) Configuration
  • 1.4 MSTP
  • Multiple Spanning-Tree (MST)
  • MST and PVST + Interoperability
  • 1.5 STP Tuning
  • Spanning-Tree Port fast
  • Spanning-Tree Root Guard
  • Spanning-Tree BDPU Guard
  • Spanning-Tree BDPU Filter
  • Spanning-Tree UDLD and Loop Guard
  • 1.6 EtherChannel
  • Introduction to Etherchannel
  • Troubleshooting Etherchannel
  • 2.1 IP Routing
  • Introduction to Routers and Routing
  • IP Routing Explained
  • Floating Static Route
  • IPv6 Static Route
  • Introduction to Administrative Distance (AD)
  • AD Configuration
  • Static Route Configuration
  • Introduction to Route Maps
  • Bidirectional Forwarding Detection (BFD)
  • 2.2 EIGRP
  • Introduction To EIGRP
  • EIGRP Configuration
  • EIGRP Packets
  • EIGRP Neighbor Adjacency
  • EIGRP Neighbor and Topology Table
  • EIGRP Authentication
  • EIGRP Static Neighbor
  • EIGRP Passive Interface
  • EIGRP Hold Time and Hello Pockets
  • EIGRP Unequal Cost Load Balancing
  • EIGRP Variance
  • EIGRP Static Neighbor
  • EIGRP K Values Formula
  • EIGRP K Value Configuration
  • EIGRP Wide Metrics
  • EIGRP Summarization
  • 2.3 OSPF
  • Introduction to OSPF
  • OSPF Basic Configuration
  • OSPF Multi-area Configuration
  • OSPF Reference Bandwidth
  • OSPF LSA Types
  • OSPF Packets and Neighbor Discovery
  • OSPF Passive Interface
  • OSPF Hello and Dead Interval
  • OSPF DR/BDR Election
  • OSPF Router ID
  • OSPF Path Selection
  • OSPF Path Default Route
  • OSPF Summarization
  • OSPF ABR Type 3 LSA Filtering
  • OSPF LSA Type 5 Filtering
  • OSPF LSA and LSDB Flooding
  • OSPF Network Type Broadcast
  • OSPF Network Type Non- Broadcast
  • OSPF Network Type Point-to-Point
  • OSPF Network Type Point-to-Multipoint
  • OSPF Network Type Point-to-Multipoint Non-Broadcast
  • OSPF Network Type Next Hop Differences
  • 2.4 OSPFv3
  • OSPFv2 vs. OSPFv3
  • OSPFv3 for UPv6 Configuration
  • OSPFv3 IPv6 Default Route
  • OSPFv3 Authentication and Encryption
  • OSPFv3 IPv6 Troubleshooting Neighbor Adjacencies
  • OSPFv3 for IPv4 Configuration
  • 2.5 BGP
  • Introduction to BGP
  • External BGP (eBGP) Configuration
  • eBGP Multihop
  • OSPFv3 Authentication and Encryption
  • How to read the BGP Table
  • Internal BGP (iBGP)
  • BGP Neighbor Adjacency
  • BGP Messages
  • Troubleshooting BGP Neighbor Adjacency
  • Troubleshooting BGP Route Advertisement
  • BGP Attributes and Path Selection
  • BGP Attribute Weight Configuration
  • BGP Attribute Local Preference Configuration
  • BGP AS-Path Prepending
  • BGP Attribute Origin Code
  • BGP Attribute Metric (MED) Configuration
  • Multi-Protocol BGP (MP- BGP)
  • BGP Single/Dual Homed and Multi-homed Designs
  • BGP Extended Access-List Filtering (Distribute-List)
  • BGP AS Path Filtering
  • BGP Prevent Transit AS
  • BGP Route Refresh Capability
  • BGP Soft Reset
  • BGP Communities
  • 2.6 VRF
  • VRF Lite Configuration
  • 2.6 VRF
  • VRF Lite Configuration
  • 3.1 Deployment Models
  • Introduction to Wireless Networks
  • Cisco Wireless Network Architectures
  • Cisco WLC Deployment Models
  • Cisco Wireless AP Models
  • Introduction To Multicast
  • Multicast IP Addresses
  • Multicast IP to MAC Address Mapping
  • IGMP Version 2
  • IGMP Version 3
  • IGMP Snooping
  • Multicast Routing
  • Multicast PIM Dense Mode
  • \
  • Multicast PIM Sparse-Dense Mode
  • Multicast PIM Sparse Mode
  • Multicast PIM Dense Mode
  • Multicast PIM Auto-RP
  • Multicast PIM Bootstrap Router (BSR)
  • Multicast RPF(Reverse Path Founding)
  • Multicast PIM Assert (forwarder)
  • Multicast PIM Designated Router (DR)
  • Cisco Campus Network Design
  • Spine and Leaf Topology
  • Cisco 6500 VSS Configuration
  • Cisco Stackwise
  • 6.1 NTP
  • Network Time Protocol (NTP)
  • Troubleshooting NTP
  • 6.2 NAT/PAT
  • Introduction to NAT and PAT
  • IP NAT Inside Source vs. Outside Source
  • Dynamic NAT Configuration
  • PAT Configuration
  • NAT Virtual Interface
  • NAT Port Forwarding
  • 6.3 First Hop Redundancy Protocols
  • Introduction to Gateway Redundancy
  • Hot Standby Routing Protocol
  • Troubleshooting HRSP
  • Virtual Router Redundancy Protocol (VRRP)
  • Troubleshooting VRRP
  • Getaway Load Balancing Protocol (GLBP)
  • 6.3 First Hop Redundancy Protocols
  • Introduction to Quality of Services
  • IntServ and RSVP
  • IP Precedence and DSCP Values
  • QoS Classification
  • QoS Marketing
  • QoS Low Latency Queuing (LLQ)
  • QoS on LAN Switches
  • QoS Trust Boundary
  • Classification and Marketing on Switches
  • Introduction to Shaping
  • Shaping Configuration
  • Introduction to Policing
  • 7.1 Troubleshooting
  • 7.1.1 Syslog
  • Syslog Messages
  • Configuration Change Notification Logging
  • 7.1.2 Debug
  • Conditional Debug
  • 7.1.3 Traceroute
  • Traceroute
  • 7.1.4 Ping
  • Internet Control Message Protocol (ICMP)
  • Ping TroubleShooting
  • 7.1.5 SPAN
  • SPAN and RSPAN
  • ERSPAN
  • 7.2 Monitoring Tools
  • 7.2.1 SNMP
  • Introduction to SNMP
  • SNMPv2 Configuration
  • SNMPv3 Configuration
  • 7.2.2 Netflow
  • Introduction to NetFlow
  • Cisco Performance Monitor
  • 7.2.3 IP SLA
  • IP Service Level Agreement (SLA)
  • 7.3 Management Tools
  • 7.3.1 Cisco DNA
  • Introduction to SD-WAN
  • Introduction to SD-Access
  • Cloud Connectivity
  • 8.1 Device Access Control
  • Telnet Server and Client
  • SSH Configurations
  • AAA 802.1X Authentication
  • AAA Authentication
  • AAA Configuration on Switch
  • AAA Local Command Authorization
  • 8.2 Infrasturcture Security
  • Standard Access-List
  • Extended Access-List
  • VLAN Access-List(VACL)
  • Infrastructure Access-List
  • Time-based Access-List
  • Control Plane Policing (CoPP)
  • Management Plant Protection
  • 8.3Wireless Security
  • Cisco WLC WPA2PSK Authentication
  • 8.4 Network Security Design Components
  • Router Security Policy
  • Internet Protocol Security (IPSec)
  • Introduction to Firewalls
  • Zoned Based Firewall (ZBFW)
  • Cloud Security Implication and Policy
  • Control Plane Policing (CoPP)
  • MAC Authentication Bypass(MAB)
  • 8.5 Tunneling
  • Generic Routing Encapsulation (GRE)
  • GRE Recursive Routing
  • Cisco IPSec Tunnel mode configuration
  • Encrypted GRE Tunnel with IPSec Configuration
  • IPSec Virtual Tunnel Interface (VTI)
  • Cisco Locator ID Separation Protocol (LISP)
  • Virtual Extensible LAN (VXLAN)
  • VXLAN Flood and Learn With Multicast
  • Introduction to Python
  • Introduction to REST API
  • Network Automation and Orchestration
  • Data Models and Structures
  • Device Programmability
  • Embedded Event Manager (EEM)
  • IP SLA EEM Script
  • Configuration Management Tools and Version Control Systems (VCS)
  • 10.1 SDN
  • Introduction to Software Define Networking (SDN)
  • Introduction to SDN OpenDaylight
  • 10.2 Virtualization Technologies
  • Cloud Deployment Models
  • Containers and Virtual Machines (VM)
  • Virtualization Functions (NVFI,VNF)
  • Introduction to Cloud Computing
  • Cisco Switch Virtualization
  • EIGRP Over the Top (OTP)
  • Test Of All The Practicals is Taken here
  • Job Assistance program

    Your intent to master next level skills are appreciated

    main-img

    Find CCNA and CCNP Online Course in Other Cities

    To meet the learning needs of people spread across various geographical locations, we are offering our high-quality training services at the location of your choice to ensure you obtain maximum impact for your training investment. Choose your city below.

    Find Out More

    Career Course





    Frequently Asked Questions

    main-img

    Cisco supports 7 CCNP tracks, which are:

    1. CCNP Enterprise
    2. CCNP Security
    3. CCNP Service provider
    4. CCNP Collaboration
    5. CCNP Data Center
    6. Cisco Certified DevNet
    7. Cisco Certified CyberOps

  • The CCNP Enterprise Study Plan outlines the topics you'll need to study each week to take the 350-401 ENCOR exam. By studying 30 minutes per day, you should be ready for the 350-401 ENCOR in about 12 weeks!
  • ENCOR 350-401 is a 120-minute exam associated with the CCNP and CCIE Enterprise Certifications. This exam tests a candidate's knowledge of implementing core enterprise network technologies including dual stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security and automation.
  • CCNA cover basics of Cisco Routing & Switching technologies and you can not skip CCNA to do CCNP. if you don't have CCNA Certification but you have knowledge of CCNA R&S, then you can go for CCNP R&S Course, but in order to get CCNP Certified and to get the Certification, you will have to pass CCNA and CCNP Exams.